Space loads
Space-specific heat loss-gain, person load, lighting and fresh air effects are calculated.
Mechanical Installation · Air Conditioning & Comfort · Çerkezköy and Çorlu
Air Conditioning, VRF and Fan-Coil Project Planning Services
We carry out the design coordination of VRF/VRV, fan-coil, air handling units and comfort air conditioning in offices, commercial areas and facilities. We consider indoor conditions, cooling-heating loads, air distribution and control needs together.
Account and System Design
Technical approach for Air Conditioning and Comfort Systems
Interior comfort; In addition to appropriate temperature, it is related to humidity, fresh air, air speed, noise and usage habits of the space. Focusing only on indoor unit capacity does not cover the entire system.
VRF/VRV coordination
Indoor-outdoor unit combination, pipe lengths, level difference and manufacturer limits are controlled by the project conditions.
FCU and AHU systems
When choosing a hydronic fan-coil or air plant, air/water flow rates, battery capacity and service conditions are evaluated.
Comfort and automation
Thermostat, zoning, condensate drainage, sound and air distribution details are determined.
Engineering Process
Four stages from discovery to implementation project
After the project data and existing system conditions are determined, calculations, layout, equipment and field coordination are brought together in the same technical document.
01
Location analysis
Usage intensity, target temperature-humidity and architectural constraints are determined.
02
Load and system decision
Loads are calculated on a location basis and suitable system alternatives are compared.
03
Device and route
Indoor-outdoor unit, pipe, drainage, duct and control placements are coordinated.
04
Project and discovery
Plan, device list, technical specifications and application details are created.
Before Starting the Project
Information required for preliminary evaluation
Depending on the type of project, the following data may be shared:
- Floor plan, suspended ceiling and shaft details
- Location functions and usage hours
- Indoor temperature-humidity requirement
- Electrical infrastructure and outdoor unit area
- Existing ventilation and fresh air system
Field and Operation
Things to consider in design
In the VRF/VRV system, the need for fresh air is not considered to be met on its own. Refrigerant safety and manufacturer piping limits are also checked according to the design to be applied.
The regulations to be applied to the project, relevant TS/TS EN standards, equipment manufacturer requirements and employer technical specifications are evaluated together. Design assumptions are verified against the actual conditions of the facility.
Submit Technical Request →Frequently Asked Technical Question
Does the VRF system replace ventilation alone?
Usually no. Heating-cooling and providing outdoor air are different tasks; The need for fresh air is calculated separately.